Yeeco DC 10A 150W Adjustable Buck Step Down Converter 7V-36V to 1.5-35V LCD Digital Display Volt Transformer Testing Gauge Constant Voltage Regulator Voltage Current Monitor Power Supply Module Board

February 13, 2018 - Comment

Specification: Output voltage: 1.5-35V (continuously adjustable, only for the use of buck module, the input must be greater than the output 1.5V or more) Output current: the maximum 10A, can adjustable (recommend to use within 8A, more than 5A or 70W, had better to strengthen the heat dissipation. recommend to install a small fan at

Specification:
Output voltage: 1.5-35V (continuously adjustable, only for the use of buck module, the input must be greater than the output 1.5V or more)
Output current: the maximum 10A, can adjustable (recommend to use within 8A, more than 5A or 70W, had better to strengthen the heat dissipation. recommend to install a small fan at the input. The constant current output voltage over 2V or more can be adjusted, the current regulation only in the constant current state can work)
Output power: maximum 150W (recommend to use within 100W. the use of large pressure, please reduce power)
Operating temperature: -20 ~ +75 degrees (when over the temperature, please strengthen the heat dissipation)
Input reverse protection: No
Short-circuit protection: Yes
Operating frequency: 3000KHz
Conversion efficiency: up to 95%
Installation: 8 copper pillars, 8 screws of 3mm
Output anti-reflux: No, please add a diode when charging
Wiring method: Wiring terminal or welding terminal, IN is input, OUT is output
Module size: 80*53*35mm (L*W*H)
Weight: 132g

Setting Description:
1. F-0 mode: display the output voltage;
2. F-1 mode: display the input voltage;
3. F-2 mode: alternating display input and output voltage;

Applications:
1. Used as an ordinary step-down module with over-current protection
2. Use as a battery charger
3. As a constant current LED driver module etc

Product Features

  • Wide input voltage: 7V-36V; Output voltage: 1.5-35V; The maximum output current is 5A; The maximum output power is 150W
  • The module adopt the delicated crystal shell and the LCD digital display, can full-screen display voltage and current; surrounded by hollow design, good to the heat dissipation
  • The conversion efficiency up to 95%; the operating temperature: -20 ~ +75 degrees
  • With the calibration function and short-circuit protection, easy to operate; the shell floor has a fan openings, can add fan to strengthen the heat dissipation
  • Widely suitable for high-power LED constant current drive, solar panels, wind turbines etc
asefur mukti
%d bloggers like this: